HOME
JAPANESE
Before using:
If you attach your neck strap, please place your iPhone in your pocket.
Do not let it hang around your neck .
Long use could cause the stainless threads to break.
Instructions
＜How to remove a screw on the iPhone＞
① Remove either one of the two screws in the bottom of iPhone with a precision screwdriver(+)
【Warning】
Please do not lose the original iPhone screw for your return to your shop for repair.
The special screw storage hole is installed in our Titanium, Aluminum and Ring types.
For plastic black/white and leather straps, there is no screw storage hole.
（Photograph 2）
＜Installation of "aisance: strap adapter＞
② Remove the protective tube from the screw by turning it. Hold the end of the string .
Be sure to straighten the loosening string.
Turn the screw of the "aisance" strap adapter into the hole straight by hand.
Do not use tools to install the screw. This screw is tiny, so turn it carefully by hand.
☆Point☆
◎Be sure that the string is straight when installing the screw.
(Refer to Photograph 3)
（Photograph 3）
【Warning】
The head of the screw must be the same level with the iPhone body.
This screw should be screwed far enough to permit the iPhone to charge through the dock.
Attention: Points of Installation (The most important)
１. The screw is microfabricated in M1.2.
Never use a tool such as a plier to turn the screw into the iPhone.
Otherwise, the head of screw will be cut off. Please turn the screw only by hand.
We cannot assume the responsibility for any damages resulting from the careless installation.
Please contact us as soon as possible in case of any problem in the installation.
We will exchange the screw or adjust it.
２. The connection part of the string and the screw is a very small space, thus the string
could be
tangled when you open the package.
First, make the string straight with your fingers in the opposite direction of insertion into
the iPhone. Then turn the screw and be careful not to catch a part of the string into iPhone.
FAQ:
Ｑ１．Battery charging or synchronizing does not work.
A１．Please make sure that the head of screw is inserted into the bottom of
iPhone body far enough.
A２．Please make the string straight and reinsert the connector.
Ｑ２．The string has come off.
A１．Please contact us within one week if the string has come off.
We will exchange or repay to the customer who purchased within one month.
(Please present Email etc. showing purchased time.)
Ａ２．The string is regarded as a consumable item, so we will charge to repair it.
Q３. I'm worried about the strength of the screw
A１. The "aisance" strap adapter has been tested to 3kg(6lbs) pull force.
.........................................Please do not pull strongly on the adapter, it would be possible to drop your iPhone.
Q4. I cannot store the original iPhone screw in the "storage hole" installed in the adapter.
A１．Put the original iPhone screw into the "storage hole" installed in the right
angle. Our Aluminum adapter is a softer than the screw.
This screw is a minute screw of M1.2 (pitch 0.25). It is easy to destroy
the thread.
Q5. Does the screw loosen?
A１．The "aisance" screw thread is coated with silicon and normally will not
loosen easily.
However, we cannot say "never loosen".
Please confirm that the head of the screw is down in the iPhone body
from time to time.
Q6. Can I get support from Apple stores when I lost iPhone original screws?
A１．Apple stores can get regular support on you iPhone.
However, you need the original screws when you exchange or repair your iPhone.
Please save the original screw back to your iPhone.
＜Video＞
Silicon (blue color) is applied to the point of the "aisance" screw to keep it from becoming loose.
It looks smooth to turn the screw as seen on the video, but take your time carefully to turn it into the iPhone body.
Please do not force it to turn with a tool such as a plier. The head of the screw may break off because this
screw is made of the microfabrication process(Break by 1.2kg or more).
Please contact us if you have a problem to info@aisance.jp
